.jpg)
EGP-PP80 filler masterbatch
EGP-PP80 is a highly filled calcium carbonate filler masterbatch containing fine pure CaCO3 in polypropylene resin and special additives.
This filler masterbatch is intended to be added into polyolefin resins during extrusion, injection or blow molding to displace a portion of the resin, improve properties, cut costs.
Adding ratio is normally in the range of 20 to 40% (or even higher in some applications) depending on the particular product and processing conditions.
Suitable applications
Extrusion: PP tape (raffia), woven PP bags, jumbo bags etc.
Injection: summer furniture, various containers, boxes, buckets, electric appliances etc.
Basic specification
| Property | Test Method | Unit | Result |
| PP & Additive |
| % | 20 ± 1 |
| Shape | Granule | mm | 2-3mm |
| Density | ASTM D1505 | g/cm3 | 1,60g/1cm3 |
| Moisture | ASTM D644 | % | <0,2% |
| CaCO3 Percentage |
| % | 80 ± 1 |
| CaCo3 Particle Size (D50) | Malvern Mastersizer 3000E | µ | 2.5 ± 0.3 |
EGP-PP82 filler masterbatch
EGP-PP82 is a highly filled calcium carbonate filler masterbatch containing fine pure CaCO3 in polypropylene resin and special additives.
This filler masterbatch is intended to be added into polyolefin resins during extrusion, injection or blow molding to displace a portion of the resin, improve properties, cut costs.
Adding ratio is normally in the range of 20 to 40% (or even higher in some applications) depending on the particular product and processing conditions.
Suitable applications
Extrusion: PP tape (raffia), woven PP bags, jumbo bags etc.
Injection: summer furniture, various containers, boxes, buckets, electric appliances etc.
Basic specification
| Property | Test Method | Unit | Result |
| PP & Additive |
| % | 18 ± 1 |
| Shape | Granule | mm | 2-3mm |
| Density | ASTM D1505 | g/cm3 | 1,60g/1cm3 |
| Moisture | ASTM D644 | % | <0,2% |
| CaCO3 Percentage |
| % | 82 ± 1 |
| CaCo3 Particle Size (D50) | Malvern Mastersizer 3000E | µ | 2.5 ± 0.3 |
EGP-PP84 filler masterbatch
EGP-PP84 is a highly filled calcium carbonate filler masterbatch containing fine pure CaCO3 in polypropylene resin and special additives.
This filler masterbatch is intended to be added into polyolefin resins during extrusion, injection or blow molding to displace a portion of the resin, improve properties, cut costs.
Adding ratio is normally in the range of 20 to 40% (or even higher in some applications) depending on the particular product and processing conditions.
Suitable applications
Extrusion: PP tape (raffia), woven PP bags, jumbo bags etc.
Injection: summer furniture, various containers, boxes, buckets, electric appliances etc.
Basic specification
| Property | Test Method | Unit | Result |
| PP & Additive |
| % | 16 ± 1 |
| Shape | Granule | mm | 2-3mm |
| Density | ASTM D1505 | g/cm3 | 1,60g/1cm3 |
| Moisture | ASTM D644 | % | <0,2% |
| CaCO3 Percentage |
| % | 84 ± 1 |
| CaCo3 Particle Size (D50) | Malvern Mastersizer 3000E | µ | 2.5 ± 0.3 |
EGP-PP01TM filler masterbatch
EGP-PP01TM is a highly filled calcium carbonate filler masterbatch containing fine pure CaCO3 in polypropylene matrix and special additives.
This filler masterbatch is intended to be added into polyolefin resins during extrusion, injection or blow molding to displace a portion of the resin, improve properties, cut costs.
Applicable for: PP non-woven fabric
Basic specification
| Property | Test Method | Unit | Result |
| PP & Additive |
| % | 21 ± 1 |
| Shape | Granule | mm | 2-3mm |
| Density | ASTM D1505 | g/cm3 | 1,60g/1cm3 |
| Moisture | ASTM D644 | % | <0,2% |
| CaCO3 Percentage |
| % | 79 ± 1 |
| CaCo3 Particle Size (D50) | Malvern Mastersizer 3000E | µ | 2.5 ± 0.3 |